Product / iTC-1

iTC-1 Touch Panel
Wall Controller

Unlike fixed-layout wall controls, the iTC-1 runs your own multi-page interface. You design each page, then link the pages with buttons and touch hotspots, so one panel can work like a full application.

Download datasheet Specifications
iTC-1 with a restaurant scene GUI iTC-1 with a house-of-worship GUI iTC-1 with a branded OEM DSP GUI

Interface

One panel, any GUI.

The display is 320×240, 24-bit color. Load photographs, logos, floor plans, or a wall of buttons — the panel does not care. The examples below are home screens, not separate products.

iTC-1 showing a boardroom source page
Boardroom home — source tiles; camera can open a PTZ page.
iTC-1 showing a restaurant scene page
Restaurant home — scenes; Event can open a private-dining page.
iTC-1 showing a house-of-worship volunteer page
Worship home — four scenes; Overflow can open a zone page.
iTC-1 showing a hotel guest-room page
Hotel home — scenes and climate; Shades can open a drapes page.
iTC-1 showing a classroom AV page
Classroom home — daily controls; extras live on a hidden page.
iTC-1 showing a branded OEM DSP page
OEM home — presets for operators; service behind a hotspot.
iTC-1 showing a whole-home scene page
Residence home — tap a room on the plan to open that page.

Technical data

Specifications

Published values from the current iTC-1 datasheet.

Display3.5" 1/4 VGA (320×240), 24-bit color, capacitive touch
InterfaceFully programmable multi-page GUI; design & control software included
ControlRS232 or RS485 control strings
Power24 VDC over CAT5/CAT5e
Cable runUp to 1,000 ft (RS232)
MountingStandard 2-gang wall box or re-work box
FeaturesProgrammable security lockout, light-based auto-dimming, tactile audio feedback
FinishCustom colors on request
Dimensions4.5 × 4.5 × 1.25 in
Weight6.6 oz
Warranty2-year limited

Current draw, environmental limits, command protocol, certifications, and part numbers are available from engineering. Call +1 (801) 489-8703.

In the wall

Catalog hardware, job-specific face.

iTC-1 classroom GUI on a white 2-gang plate iTC-1 whole-home GUI on a white 2-gang plate

Integration

Built to be controlled.

Send and receive control strings over RS232 or RS485 from any controller, PLC, or host system. Power and data share one CAT5/CAT5e cable.

RS232

Point-to-point

Up to 1,000 ft over CAT5. Typical for a single panel to a DSP, mixer, or OEM host.

RS485

Multi-drop bus

Same cable plant; addressing and node count follow the host protocol. Engineering can supply the current command set.

Resources

Downloads